Allroad Quattro V8-4.2L (BAS) (2004)
2
-
Tailgate trim (top section)
-
Bottom section of trim - 1 - removed
Removing
-
Remove caps - 8 - (2x).
-
Remove screws - 9 - (2x).
-
Remove mounts - 10 - (2x) for sun shade.
-
Unclip retainers - 7 - on both sides.
-
Release clips - 11 - (7x) on top section of trim - 2 - by pulling sharply (do not use excessive force).
Installing
-
Before installing top section of trim - 2 -, make sure that rubber buffers - 6 - (10x) are installed properly.
-
Install top section of trim - 2 - into place behind side flanges on tailgate first.
-
Then clip in top section of trim - 2 - at the top, and then at the sides.