Allroad Quattro V8-4.2L (BAS) (2004)
Console: Service and Repair
Center Armrest, Removing and Installing
Center Armrest, Removing And Installing
1
-
Center armrest
-
Remove rear vent and rear air-duct connecting piece
-
On center armrest with telephone, disconnect connector - 2 - by squeezing retainer tabs - 3 -.
-
Remove nut - 4 -.
-
Remove center armrest - 1 -.
-
When installing, clamp in connector - 2 - on right-hand side between support bracket and center console.
2
-
Connector
3
-
Retainer tabs
4
-
Nut
-
Tightening torque: 26 Nm (19 ft lb)