Allroad Quattro V8-4.2L (BAS) (2004)
Child Seat: Service and Repair
Belt Webbing Guides, Removing and Installing
Child Seat Bench (Avant)
Belt Webbing Guides, Removing And Installing
NOTE: The belt webbing guides shown may differ from the ones installed in the vehicle. However, removing and installing procedures are the same.
1
-
Belt webbing guides
Removal
-
Remove bolts - 2 - (4x).
-
Remove belt webbing guides - 1 - (2x) upward.
Installation
-
Push inserts - 3 - (2x) through upholstery and foam into seatback frame in direction of arrow.
-
Press belt webbing guides - 1 - (2x) onto inserts - 3 - (2x) in direction of arrow until they engage.
-
Bolt in belt webbing guides - 1 - (2x) using bolts - 2 - (4x).
2
-
Bolts
3
-
Inserts.