Allroad Quattro V8-4.2L (BAS) (2004)
Seat Heater: Service and Repair
Removing and Installing Glued Backrest Heating Element (2/3 Backrest Section)
Removing And Installing Glued Backrest Heating Element (2/3 Backrest Section)
-
Backrest heating element is glued in up to VIN 4BW 092 308 for leather or 4BW 101414 for imitation leather /fabric.
-
Remove seat bench.
-
Remove 2/3 backrest section.
-
Remove backrest cover.
-
Cut electrical wire off old heating element - 1 -.
-
Glue new heating element onto old one (avoid creasing).
-
Insert heating element into folds at locations marked - A -.
-
Insert wire - 2 - into slot - B - provided.