Allroad Quattro V8-4.2L (BAS) (2004)
/Page-3270001.png)
Brake Caliper: Service and Repair
Front Brake Caliper (Brembo 18), Servicing
Brake caliper, servicing
Note:
^
Only use methylated spirits to clean the brake.
^
Install complete repair kit when servicing.
^
New brake calipers are filled with brake fluid and are pre-bled.
^
Apply thin coat of assembly paste G 052 150 A2 to brake cylinder, piston and sealing ring.
1. Protective cap
^
Install onto bleeder valve
2. Bleeder valve, 12 Nm
^
Apply thin coat of assembly paste G 052 150 A2 to thread before screwing in
3. Brake caliper housing
4. Sealing ring for 32 mm piston.
5. Sealing ring for 28 mm piston.
6. 32 mm piston
^
Apply thin coat of assembly paste G 052 150 A2 to piston before inserting
7. 28 mm piston
^
Apply thin coat of assembly paste G 052 150 A2 to piston before inserting
8. Dust seal for 32 mm piston
^
Do not damage when inserting piston
9. Dust seal for 28 mm piston
^
Do not damage when inserting piston
10. Support plate
11. Hex socket head bolt, 6 Nm
12. Connecting tube, 17 Nm
