Allroad Quattro V8-4.2L (BAS) (2004)
Vacuum Pump: Service and Repair
Electric Vacuum Pump, Removing and Installing
Electric vacuum pump, removing and installing
No provision is made for servicing the vacuum pump. If problems are encountered, determine cause by means of a function test and leak test. If a
malfunction is found the electric vacuum pump must be replaced.
Removal:
-
Remove design cover.
-
Unplug electrical connector-2-.
-
Detach vacuum hose -1- from vacuum pump.
-
Press clip out of retainer by hand.
-
Lift out electric vacuum pump from above.
Installing
Install in reverse order.