Allroad Quattro V8-4.2L (BAS) (2004)
Coolant Line/Hose: Service and Repair
Front Coolant Pipe, Removing and Installing
Front coolant pipe, removing and installing
Special tools and equipment
^
Drip tray VAG 1306
Removing
-
Drain off coolant.
-
Move lock carrier to service position; Refer to Body and Frame; Radiator Support, Service and Repair See: Body and Frame/Lock Carrier/Service
and Repair/Procedures
-
Remove bolts (arrows) and detach torque reaction support from engine.
-
Position drip tray V.A.G 1306 beneath engine.
-
Remove coolant pipe (arrows) at front of engine.
Installing
Install in reverse order, paying attention to the following:
Note:
^
Replace sealing rings and O-rings.
^
Secure aft hose connections with standard hose clamps; Refer to Part Supplier
-
Install lock carrier with attachments.
Refer to Body and Frame; Radiator Support, Service and Repair See: Body and Frame/Lock Carrier/Service and Repair/Procedures