Allroad Quattro V8-4.2L (BAS) (2004)
-
Remove rear engine cover (arrows).
-
Remove front engine cover (arrows -1- and -2-).
-
Remove bolts (arrows) and coolant expansion tank -2-.
-
Disconnect wire to engine coolant level (ECL) warning switch -F66- and lay aside coolant expansion tank with coolant hoses -1- and -3connected.
-
Remove power steering reservoir cover (arrow).
-
Remove bolt (arrow) at dipstick guide tube.
Note: Leave guide tube inserted in upper part of oil pan.
-
Remove air cleaner cover -2-.
-
Remove air duct -1
Note: Pull out clips (arrows) using pry lever 80-200.