Allroad Quattro V8-4.2L (BAS) (2004)
Oil Cooler: Service and Repair
Oil cooler, removing and installing
Special tools and equipment
^
Drip tray
Removing
-
Remove generator.
-
Remove bolts (arrows).
-
Remove holder for generator.
-
Place drip tray in position.
-
Remove coolant hose -1- at oil cooler.
-
Remove bolts (arrows) and remove oil cooler.
Installing
Install in reverse order, note the following:
Notes:
^
Replace O-rings.
^
Secure all hose connections with standard hose clamps; Refer to Part Supplier
-
Observe two dowel sleeves on installing holder for generator.
-
Install generator.
Tightening torques