Allroad Quattro V8-4.2L (BAS) (2004)
/Page-1492002.png)
-
Remove coolant hose -3- at generator.
-
Disconnect connector -1 -.
-
Remove fastener and wire -2- at generator.
-
Remove bolts (arrows).
Note:
^
If generator sticks in holder, thread bolt back in again down to the last 2 turns.
^
Tap carefully on bolt heads with flat side of hammer to release threaded bushes of alternator mount.
-
Remove generator.
-
Remove bolts (arrows).
-
Remove holder for generator.
