Allroad Quattro V8-4.2L (BAS) (2004)
-
Insert camshaft locator T40046 in camshafts of left cylinder head.
-
Insert camshaft locator T40046 in camshafts of right cylinder head.
^
Repeat adjustment if camshaft locators cannot be inserted
-
Pull out plastic wedges 3409.
-
Remove camshaft locators at both cylinder heads.
-
Remove locating bolt 3242.
-
Screw TDC mark screw plug with new oil seal into upper part of oil pan.
Perform further installation in reverse order, note the following:
-
Install covers for timing chains.
-
Install left and right front exhaust pipe.
-
Install engine.
Tightening torques