Allroad Quattro V8-4.2L (BAS) (2004)
-
Remove bolts (arrows) and detach right heat shield.
-
Remove bolts -5- and -6- at left cylinder head.
-
Unplug connectors -1 -to -4-. - Pull out ignition coils (arrows).
Note: Special tool T10094 can be used for removal.
-
Detach crankcase breather hose (arrow).
-
Remove bolts for left cylinder head cover in sequence -15- to -1 -.
-
Detach cylinder head cover.
-
Remove bolts -5- and -6- at right cylinder head.
-
Disconnect connectors -1 -to -4-.
-
Pull out ignition coils (arrows).
Note: Special tool T10094 can be used for removal.
-
Detach crankcase breather hose (arrow).
-
Remove bolts for right cylinder head cover in sequence -15- to -1 -.