Allroad Quattro V8-4.2L (BAS) (2004)
-
Tighten nuts -1- to -3- on front exhaust pipe exhaust manifold bolted joint evenly and in stages and align front exhaust pipe with lug.
-
Install subframe.
-
Install drive shaft.
-
Install left drive shaft.
Note: For individual components of exhaust system mounting at transmission, Refer to Exhaust System, Service and Repair, Exhaust System
Components, Removing and Installing, see Fig. 4.
-
Perform stress-free alignment of exhaust system.
Tightening torques