Allroad Quattro V8-4.2L (BAS) (2004)
-
Insert 3307 Fuel Pump Wrench through fuel tank opening and place on accumulator.
-
Using 3307 fuel pump wrench, turn fuel pump module approx. 15 degrees to right (to stop).
-
Notch -1- must then align with marking -3-.
-
Insert solid line -3- and hose -5- in relevant openings of accumulator -6-.
-
Push return line -1- onto distributor connector -4- until hose coupling engages.
NOTE:
-
Always use new O-rings -7- for the return line.
-
Lubricate O-rings for return line with fuel or lubricant.