Allroad Quattro V8-4.2L (BAS) (2004)
/Page-6301001.png)
Turn Signal Lamp: Service and Repair
Rear Turn Signal/Tailamp Bulb Carrier, Removing and Installing
Bulb Carrier, Removing and Installing
Removing
-
Open storage compartment in luggage compartment on respective side.
-
Disconnect electrical harness connector -3-
-
Press mounting bracket -2- together and remove bulb carrier -1- from rear light fixture toward vehicle interior.
-
Twist bulbs out of bulb sockets.
Installing
Installation is the reverse of removal.
