Allroad Quattro V8-4.2L (BAS) (2004)
-
Remove upper coolant hose (arrow) from radiator.
-
Remove bolts -1 -and -2-.
-
Unfasten hose clamps (arrows) and remove right coolant pipe from coolant hoses.
Installing
Install in reverse order, paying attention to the following:
Note:
^
Re-attach aft cable ties at same location on installation.
^
Secure all hose connections with standard hose clamps; Refer to Part Supplier
-
Allow stop for torque reaction support to settle on rubber buffer for torque reaction support and tighten bolts (arrows) to 28 Nm.
-
Fill with coolant.
Tightening torques