audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Front Wheel Bearing, Pressing Out and In (Wheel Bearing Housing Removed)|Page 3369 > < Front Wheel Bearing, Pressing Out and In (Wheel Bearing Housing Removed)|Page 3367

Allroad Quattro V8-4.2L (BAS) (2004)

Page 7
background image

Fig.10 Pressing wheel hub into wheel bearing with 82 mm diameter

Note:  Make sure that deadweight of wheel bearing housing does not press on wheel hub. This can damage wheel bearing.

^

When pressing in, pressure piece (VW447i) must rest only against bearing inner race.

Note:  While pressing in wheel bearing housing, must be kept as horizontal as possible. Otherwise, wheel hub would tilt in wheel bearing, causing
early damage to bearing.

Front Wheel Bearing, Pressing Out and In (Wheel Bearing Housing Removed)|Page 3369 > < Front Wheel Bearing, Pressing Out and In (Wheel Bearing Housing Removed)|Page 3367