Allroad Quattro V8-4.2L (BAS) (2004)
Seat Belt: Service and Repair
Rear 3-Point Seat Belt For Children's Bench (Avant), Removing and Installing
Rear 3-point Seat Belt For Children's Bench (Avant), Removing And Installing
1
-
3-point inertia-reel seat belt
Removing
-
Remove luggage compartment floor trim.
-
Remove bolt - 3 - (1x).
-
Compress trim piece - 6 - at cut-out below seat belt, and pry off trim piece - 6 - with a screwdriver.
-
Remove respective side padding.
-
Remove upper C-pillar trim.
-
Remove bolt - 8 -.
-
Take off guide fitting - 9 - and bushing - 10 -
-
Remove screw - 2 -.
-
Remove 3-point inertia-reel seat belt - 1 -with anti-twist element - 11 -.