Allroad Quattro V8-4.2L (BAS) (2004)
^
Place cover onto the guide of sliding cover and snap clips -arrows- in place.
^
Install handle for selector lever; Refer to Fig. 7
^
Install center console and extension.
Fig. 6 Wiring for Shift Lock Solenoid Switch, selector lever Illumination and Tiptronic, removing and Installing
Removing
^
Remove center console and extension.
^
Disconnect connector -1- for Shift Lock Solenoid switch -2- (not visible in illustration).
^
Unclip and lift out cover -3-.
^
Remove connector -4- for transmission range position and Tiptronic in direction of arrow.
^
Disconnect wiring at connector -5-.
Installing
Install in reverse order of removal.
Fig. 7 Handle for selector lever, removing and Installing
Removing
^
Move selector lever to position "T'
^
Push sleeve -1- down to stop.
^
Pull button -2- to stop (dimension "a") out of selector lever handle -3 and pull handle upward.
Dimension "a" = 3 mm
Installing
^
Move selector lever to position "3" .