Allroad Quattro V8-4.2L (BAS) (2004)
^
Remove wheel.
^
Disconnect ABS speed sensor wire out of holder at brake caliper.
^
Unscrew nut -1-.
Bolts -3- and -4- are never to be loosened.
^
Position body -1- on wheel bearing housing. In doing so, recesses engage beneath joints of links.
Note: On inserting body, pay attention to boot as to avoid damage.
^
Insert body -1- so that end of bolt (arrow) is centered in hole in body.
^
Screw home adapter -2- in body -1- to lock body.
^
Screw home threaded sleeve -4- in body -1-.
^
Insert press tool -5- in threaded sleeve -4-.