Allroad Quattro V8-4.2L (BAS) (2004)
/Page-3951003.png)
^
Screw nut -8- onto threaded sleeve -4- and turn as far as it will go, thus pressing out bolt.
Note: Use a wrench or an impact screwdriver to turn nut -8-.
^
Unscrew nut -8- from threaded sleeve -4-, take out press tool -5- and insert press tool -6- in threaded sleeve -4-.
^
Repeat pressing operation.
^
If bolt can still not be taken out by hand, repeat pressing operation with press tool -7-.
^
Unscrew nut -8- from threaded sleeve -4-. Take out press tool and bolt.
^
Screw thrust bolt -3- into one of the guides -A- in each case and press links -B- out of wheel bearing housing.
^
Screw thrust bolt -3- out of guide -A- and release adapter -2-.
^
Detach body -1- from wheel bearing housing.
