Allroad Quattro V8-4.2L (BAS) (2004)
/Page-4012001.png)
Spindle: Service and Repair
Wheel Bearing Housing, (Steel) Removing and Installing
Wheel Bearing Housing, (Steel) Removing and Installing
Removing
^
Unscrew hex bolt for drive axle.
^
Remove wheels.
^
Unscrew attachment screws -1- from brake caliper.
^
Take off brake caliper and hang on body.
^
Remove brake disc.
^
Unscrew bolts for backing plate.
^
Take off backing plate.
^
Remove ABS wheel speed sensor from wheel bearing housing.
^
Remove bolt -1- for coupling rod.
^
Unscrew bolt -A- for tie rod.
^
Mark installation position of eccentric washer for bolt -B-.
^
Unscrew bolt -B-.
