Allroad Quattro V8-4.2L (BAS) (2004)
Wheel Bearing: Service and Repair
Front Wheel Bearing, Pressing Out and In (Wheel Bearing Housing Removed)
Front wheel bearing, pressing out and in (wheel bearing housing removed)
1. Wheel bearing housing
^
Note different suspension versions
^
Application
^
See Parts Supplier
2. Wheel bearing
^
Installation position:
^
Larger inside diameter of wheel bearing faces wheel hub.
^
Pressing out 75 mm dia. refer to Fig. 3
^
Pressing out 82 mm dia. refer to Fig. 4
^
Pressing off bearing inner race refer to Fig. 5 and refer to Fig. 6
^
Pressing in 75 mm dia. refer to Fig. 7
^
Pressing in 82 mm dia. refer to Fig. 8
^
Pressing out and pressing in with wheel bearing housing installed
3. Wheel hub
^
Stepped design
^
Pressing out 75 mm dia. refer to Fig. 1
^
Pressing out 82 mm dia. refer to Fig. 2
^
Pressing in 75 mm dia. refer to Fig. 9
^
Pressing in 82 mm dia. refer to Fig. 10
^
Contact surface between rim/brake disc as well as brake disc1wheel hub must be free from rust, corrosion products and dirt.
^ Pressing out and pressing in with wheel bearing housing installed
^
Application
^
See Parts Supplier
^
Lightweight construction hub
4. Hex bolt, 10 Nm
5. Backing plate