Allroad Quattro V8-4.2L (BAS) (2004)
Wheel Bearing: Service and Repair
Front Wheel Bearing, Servicing
Front wheel bearing, servicing
1. Wheel bearing housing
^
Note different suspension versions
^
Application
^
See Parts Supplier
2. Spherical cap bolts 80 Nm plus additional 90° turn
3. Bushing
4. Backing plate
5. Hex bolt, 10 Nm
6. Wheel hub
^
Pressing out refer to Fig. 1 and refer to Fig. 2
^
Pulling off bearing inner race refer to Fig. 3
^
Stepped design
^
Contact surface between rim/brake disc as well as brake disc/wheel hub must be free from rust, corrosion products and dirt.
^
Lightweight construction hub
7. Angular ball bearing
^
Pressing out 75 mm dia. refer to Fig. 1
^
Pressing out 82 mm dia. refer to Fig. 2
^
Pressing in 75 mm dia. refer to Fig. 5
^
Pressing in 82 mm dia. refer to Fig. 6
^
Pressing off bearing inner race refer to Fig. 3
^
Removing and installing with wheel bearing housing installed
^
Installation position:
-
Larger inside diameter of wheel bearing faces wheel hub.
^
Pressing out and pressing in with wheel bearing housing installed