Allroad Quattro V8-4.2L (BAS) (2004)
Shifter A/T: Service and Repair
Selector Lever Mechanism and Controls, Assembly
Selector lever mechanism and controls, assembly
Removing and Installing
Note: Lubricate bearings and sliding parts with lubricant Part No. G 052 142 A2. Check with your Parts Dept for latest part number.
1. Selector lever handle
^Removing and installing; Refer to Fig. 7
2. Sleeve
^
Engages into grip for selector lever
3. Cover
^
With transmission range display, display for shift lock and Tiptronic
6
Lift up to remove
^
To remove, unlock holding tabs from mounting bracket - 21 - with screwdriver.
^
Remove connector for transmission ranges and Tiptronic; Refer to Fig. 6
4. Cover
^
Separate piece
5. Trim piece
^
Insert in symbol panel
6. Symbol panel
^
With circuit board
^
With integrated Tiptronic Switch -F189. Location, removing and installing; Refer to Fig. 5
^
s attached to cover - 4 - with clips.
7. Slide cover
^
To remove, unclip guide from cover - 4 -
8. Guide
^
Guides slide cover
^
To remove, unclip guide from cover - 4 -