Allroad Quattro V8-4.2L (BAS) (2004)
Transmission Position Switch/Sensor: Service and Repair
Electrical/Electronic Components and Locations
5 SPD. A/T 01L AWD
Electrical/electronic components and locations
1. Automatic transmission Control Module (TCM) -J217
^
Component location; Refer to Fig. 1
^
Removing and installing; Refer to Fig. 2
^
Mufti-pin connector release; Refer to Fig. 3
2. Engine Control Module (ECM)
^
Location; Refer to Fig. 4
3. ABS Control Module
^
Location; Refer to Fig. 7
4. Data Link Connector (DLC)
^
Location; Refer to Fig
5. Valve body
^
Location; Refer to Fig
6. Transmission Internal wiring harness with Integrated Transmission Fluid Temperature Sensor (ATF) -G93 Location; Refer to Fig.
7. Multl4unctlon Transmission Range (TR) Switch -F125
^
Location and removing and installing; Refer to Fig. 8
8. Sensor for Transmission RPM -G182
^
Location and removing and installing; Refer to Fig. 10
9. Sender for Transmission Output RPM -G195
^
Location and removing and installing; Refer to Fig. 11
10. Speedometer Vehicle Speed Sensor (VSS)-G22
^
Location and removing and installing; Refer to Fig. 11
11. Selector lever mechanism
12. Tiptronic Switch -F189