Allroad Quattro V8-4.2L (BAS) (2004)
^
Always replace.
6. ATF screen
^
Removing and installing, refer to ATF Screen, Rmoving and Installing.
7. O-ring
^
Always replace.
^
Lubricate with Vaseline
8. Bolt- 8 Nm (71 inch lbs.)
^
To secure valve body: 5 bolts M6 x 30, 1 bolt M6 x 55 (chromates), 15 bolts M6 x60
^
Observe tightening sequence, Refer to Specifications.
9. Valve body
^
Removing and installing, Refer to Valve Body, Removing and Installing.
10. O-ring
^
Always replace.
^
Lightly lubricate with Vaseline
11. Speedometer - Vehicle Speed Sensor (VSS) -G22
^
Replacing, refer to Speedometer - Vehicle Speed Sensor.
12. Sender for - transmission output RPM - G195
^
Replacing, Refer to Sender for Transmission Output RPM, Removing and Installing.
13. Seal for selector lever shaft
^
Removing and installing, Refer to Selector Shaft Seal, Removing and Installing.
14. Selector shaft
^
To remove, remove spring pin item 15.
15. Spring pin
16. Multi-Function Transmission Range (TR) Switch -F125
^
Replacing, Refer to Multi-Function Transmission Range Switch.
17. Bolt - 8 Nm (71 inch lbs.)
18. Bracket for cable of TR switch
^
Secured with bolts for TR switch
19. Bolt - 5 Nm (44 inch lbs.)
20. Bracket for solenoid valves
^
Must be removed when replacing solenoid valves
21. Solenoid Valve 3- N9O
^
Without O-ring
^
To replace remove oil pan
22. Solenoid Valve 2 - N89
^
Without O-ring
^
To replace remove oil pan
23 - Solenoid Valve 1 - N88
^
Without O-ring
^
To replace remove oil pan
24. Pressure - regulating valve -5- N233
^
With O-ring
^
When installing, lightly lubricate O-ring with Vaseline.
^
To replace remove oil pan
25. Pressure - regulating valve -2- N216
^
With O-ring
^
When installing, lightly lubricate with Vaseline.
^
To replace remove oil pan
^
Removing and installing
26. Pressure - regulating valve -3- N217
^
With O-ring
^
When installing, lightly lubricate with Vaseline.
^
To replace remove oil pan
^
Removing and installing
27. Pressure - regulating valve -4- N218
^
With O-ring
^
When installing, lightly lubricate with Vaseline.
^
To replace remove oil pan
^
Removing and installing
28. Pressure regulating valve -1- N215
^
With O-ring
^
When installing, lightly lubricate with Vaseline.
^
To replace remove oil pan
^
Removing and installing
29. O-ring
^
Always replace.