Allroad Quattro V8-4.2L (BAS) (2004)
Flex Plate: Service and Repair
Dual-Mass Flywheel or Drive Plate, Removing and Installing
Dual-mass flywheel or drive plate, removing and installing
Special tools and equipment
^
Counterhold 10-201
Removing
-
Remove engine
-
Separate engine/transmission assembly.
-
Place engine on workbench or a firm surface and secure in position with wooden blocks.
WARNING:
^
Engine must be secured to avoid risk of accident
^
Do not set down engine on oil pan.
-
Mark drive plate and packing plate with respect to engine.
-
Insert counterhold 10-201 for loosening bolts.
-
Unscrew drive plate.
Installing
Install in reverse order, note the following:
-
Install drive plate with packing plate.
-
Use new bolts for attachment.
-
Re-position counterhold 10-201 for tightening bolts.
-
Bolt transmission to engine and install engine/transmission assembly.