Allroad Quattro V8-4.2L (BAS) (2004)
^
Drive double seal out in direction of transfer gear using suitable mandrel.
Installing
Installation is the reverse of removal. Also carry out the following procedures.
^
Check seal seat in transmission housing for damage; rework if necessary.
^
Slide seal onto thrust piece 3404 so that larger and most projecting outer ring (arrow) of seal faces tool.
^
Drive double seal in to stop using 3404 thrust piece.
CAUTION: The seating lips of the seat (arrow) may be damaged If the Intermediate flange Is placed onto the output shaft without proper care.