Allroad Quattro V8-4.2L (BAS) (2004)
/Page-3107001.png)
Transmission Speed Sensor: Service and Repair
Transmission Vehicle Speed Sensor-G38-
Transmission vehicle speed sensor -G38-, removing and installing
Removing
^
Remove oil pan.
^
Disconnect harness connector from transmission Vehicle Speed Sensor (VSS) -G38-.
^
Transmission speed sensor -2-.
Installing
^
Use spacer sleeve -1- (height 8 mm) to install sensor -2- and tighten to 8 Nm.
^
Connect harness connector at transmission Vehicle Speed Sensor (VSS) -G38-.
^
Install oil pan.
^
Fill up ATF.
