Allroad Quattro V8-4.2L (BAS) (2004)
Rear Door Window Motor: Service and Repair
Window Regulator Motor, Removing And Installing
-
Door trim and door component carrier removed
NOTES:
-
The window regulator motor can be installed or removed with the motor and the door window in any position.
-
After installing the electric motor and wiring, switch the ignition on and off.
-
Run the door window up to the top position (fully closed) and hold the window regulator switch for another 2 seconds.
-
The window regulator is now in the basic setting and the "one-touch" opening/closing function is activated.
-
Unscrew Torx(R) bolts (arrows) and remove electric motor.
Tightening torque: 6.5 Nm (58 in.lb)