Allroad Quattro V8-4.2L (BAS) (2004)
/Page-6516001.png)
Windshield Washer Reservoir: Service and Repair
Washer Fluid Reservoir, Removing and Installing
Removing
-
Remove left front wheel.
-
Remove wheel housing liner, front left.
-
Remove bolt (arrow).
-
Disconnect harness connector at windshield washer pump.
-
Remove windshield washer pump from washer fluid reservoir and remove washer fluid reservoir.
-
Remove bolts (arrows).
-
Disconnect electrical harness connector -2-.
-
Remove washer fluid reservoir -1- downward and out of engine compartment.
Installing
Installation is the reverse of removal.
