Allroad Quattro V8-4.2L (BAS) (2004)
Windshield Washer Spray Nozzle: Service and Repair
Connector Tube For Spray Jet, Removing and Installing
Connector Tube For Spray Jet, Removing and Installing
-
Remove spray jet.
-
Carefully disconnect water hose -9- from connector tube -6-.
-
Loosen mounting bolts (7 x T10) -arrows- and remove engine cover -10-.
-
Carefully pull out connector tube -6- using universal pliers.
Installing
Installation is reverse of removal, noting the following:
-
Install connector tube and insert spray jet into connector tube with sealing rubber.
NOTE: Install spray jets so that the spray opening points vertically upward.