Allroad Quattro V8-4.2L (BAS) (2004)
Wiper Arm: Adjustments
Required special tools and test equipment
3358 windshield wiper adjuster
Wiper arm angle, checking
-
Move wiper arms to park position.
-
Remove wiper blades.
-
Insert wiper arm -2- into windshield wiper adjuster 3358 and secure with locking screw -3-.
-
Compare actual angle with specifications.
-
Driver's side: -9 °C
-
Passenger's side: -5 °C
-
Tolerance: +/- 0 °C
Wiper arms, adjusting
If the wiper arm angle is not as specified:
-
Move wiper arms to park position.
-
Remove wiper blade.
-
Insert wiper arm -2- into windshield wiper adjuster special tool 3358 and secure with locking screw -3-.
-
Adjust wiper arm to specified angle using a 24 mm wrench -1- as shown.
-
Remove windshield wiper adjuster special tool 3358 from wiper arm -2-, then install tool on arm again and re-check angle.