Allroad Quattro V8-4.2L (BAS) (2004)
Wiper Blade: Service and Repair
Rear Wiper Blade Skipping, Correcting
Required tools
-
3358 B windshield wiper adjuster
Possible causes See: Windshield Washer Reservoir/Service and Repair
Checking adjustment angle
-
Place wiper arm in park position.
-
Remove wiper blade.
-
Install wiper arm -2- into 3358 B windshield wiper adjuster and tighten with locking knob -3-.
-
Compare indicated angle with specified value in table below.
Adjusting wiper arm, refer to "Wiper Blade Contact Angle, Adjusting".