Cabriolet V6-2.8L (AFC) (1995)
Fig. 4 Installing Inner Sealing Lip Protective Cap
Press gently into groove in brake caliper housing using screwdriver.
NOTE:
During this process, hold the piston in position in front of the brake caliper housing.
Fig. 1 Removing piston from brake caliper
Fig. 5 Installing Piston Into Brake Caliper Housing
Thread in piston by turning threaded spindle clockwise and knurled wheel counterclockwise.
Turn in fully.
NOTE:
While threading in, the outer sealing lip of the protective cap seats in the groove of the piston.