Cabriolet V6-2.8L (AFC) (1995)
Parking Brake Lever: Service and Repair
Component Notes And Information
NOTE: Before installing components, grease all contact surfaces with white grease, part No. AOS 126 000 05, or equivalent.
1
Handle
-
Slide onto parking brake lever until tab on lever engages in handle
2
Cover
-
Slide onto parking brake lever
3
Parking Brake Lever
-
Supplied as a complete assembly with pull rod, lock knob, push rod, compression spring and locking mechanism.
4
Circlip
-
Always replace
-
Make sure of correct fit
5
Mount
6
Leaf Spring
-
Install in bracket
7
Pin
-
Install in balance bar
-
Install pull rod through holes
8
Adjusting Nut (Self Locking)
-
Always check basic adjustment. See: Adjustments
9
Bushing
-
Slide onto pull rod
10
Balance Bar
11
Mounting Pin
12
Boot
-
Make sure of correct fit
Procedures
Removal
1. Unclip cover with screwdriver