Cabriolet V6-2.8L (AFC) (1995)
Tool Testing/Scan Tool Connecting and Initial Checks/Connecting VAG 1598/31 Test Box
^
ECM is not connected.
If LED lights up continuously:
-
Check wiring for short circuit to GND between valve connector terminal 2 to test box socket 12.
If LED does not blink:
-
Check wiring for continuity between connector terminal 2 and test box socket 12.
^
Specified reading: maximum 1.0 ohm
-
If necessary, eliminate open circuit or short circuit to GND between EVAP canister purge regulator valve connector terminal 2 and ECM
connector -D- terminal 1.
If there is no open circuit or short circuit
-
replace ECM.