Coupe GT L5-2226cc 2.22L SOHC (KX) (1986)
Bi-pressure pump, removing
Work sequence
Bi-pressure pump
-
remove right side trim panel in trunk
-
unbolt pump (arrow)
-
pull off electrical connector
-
pull off pressure hose
-
remove pump with insulation
Bi-pressure pump, installing
Work sequence
-
reinstall pressure hose
-
reinstall electrical connector
-
remount pump
-
reinstall trim panel
-
check system for proper function
Note
If bi-pressure pump has been replaced, the power operated door locks will only function after being operated several times.
Door control/operating valve, removing
Work sequence
Control/operating valve
-
remove door trim panel
-
pull back plastic moisture barrier
-
remove bolts (arrows)
-
unhook connecting rod
-
pull off pressure hose (R/S door only)
-
remove electrical connector (driver's door only)
Note
Driver's door contains control valve. Right side door has operating valve.
-
remove control/operating valve
Door control/operating valve, installing
Work sequence
-
reinstall pressure hose
-
rehook connecting rod
-
reinstall electrical connector (if applicable)
-
reinstall control/operating valve
-
check plastic moisture barrier for damage, replace if necessary