Q5 Quattro V6-3.2L (CALB) (2009)
Antenna - Keyless Entry: Service and Repair
Access/Start Authorization Antennas
Removing
-
Remove relevant rear door trim.
-
Remove the screws - arrows - and remove the interior access/start authorization antennas - 2 -.
-
Disconnect the electrical connector - 1 -.
Installing
‹› Tightening specification. Refer to => [ Left Access/Start Authorization Antenna Tightening Specifications ] See: Service and Repair/Keyless
Access System Assembly Overview
Install in reverse order of removal, observing the following:
-
Install rear door trim.