Q5 Quattro V6-3.2L (CALB) (2009)
Leak Detection Pump: Service and Repair
Leak Detection Pump
Leak Detection Pump
Removing
-
Remove EVAP canister. Refer to => [ EVAP Canister ] See: Evaporative Emission Control Canister/Service and Repair/EVAP Canister.
-
Unclip vacuum line bracket - 3 -.
-
Remove bolts - 1 -.
-
Remove Leak Detection Pump (V144) - 2 - from the EVAP canister.
Installing
‹› Tightening specifications. Refer to => [ EVAP Canister and Leak Detection System Assembly Overview ] See: EVAP Canister and Leak
Detection System Assembly Overview.
Installation is in reverse order of removal, note the following:
‹› Replace the gasket.
-
Install EVAP canister. Refer to => [ EVAP Canister ] See: Evaporative Emission Control Canister/Service and Repair/EVAP Canister.