Q7 Quattro V6-3.6L (BHK) (2007)
Sun Shade: Service and Repair
Front Sun Shade, Removing
Sun Shade
Front Sun Shade, Removing
-
Panel 3 and 2 removed.
CAUTION!
‹› Sun shade is pre-tensioned by a spring and must be secured against unwinding before removing
‹› If tension on sun shade or spring is released, they can be re-tensioned
‹› When tensioning, note different rotations for tensioning front and rear sun shade.
Shade, Securing
-
Before shade is removed from bracket - 1 -, secure it against rolling up with a securing pin - arrow -.
-
In order to secure shade, it must be rolled up into the correct position, if necessary.
-
Using a hex socket head wrench, rotate shade motor into open direction to removal position.
-
To do this, raise shade bracket and guide it along by hand.
-
Now remove shade arch with slides from guide.
-
Remove shade screws - 2 - from shade bracket.