Q7 Quattro V6-3.6L (BHK) (2007)
‹› Lay a cloth below to catch dripping coolant.
-
Clamp off coolant hoses - 2 and 3 - using hose clamps (3094) and remove coolant hoses from after-run coolant pump (V51).
‹› Ignore - 1 -.
-
Spray rubber nubs - 2 and 4 - on after-run coolant pump (V51) retainer - 1 - with silicone free lubricating spray.
-
Disengage rubber nubs from retainer - 3 - for after-run coolant pump (V51).
Installing
Installation is in reverse order of removal, note the following:
-
Fill with coolant => [ Filling ] See: Service and Repair.