Q7 Quattro V6-3.6L (BHK) (2007)
/Page-1825004.png)
‹› The ATF inspection plug must be installed again before the ATF reaches a temperature of 45°C (for hot countries 50 °C).
‹› If ATF leaks from ATF check hole before temperature has reached 40°C, ATF level - arrow - is OK.
‹› If no ATF escapes from the ATF check hole before temperature has reached 40 °C, ATF level - arrow - is not OK, ATF must be topped off.
If ATF is OK:
-
Replace ATF inspection plug.
-
Tighten new ATF inspection plug - arrow -, tightening torque => [ Oil Pan, Strainer and Mechatronic, Assembly Overview ] See: Transmission
and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and Repair/Oil Pan, Strainer and Mechatronic, Assembly Overview. This
ends ATF test.
