Q7 Quattro V8-4.2L (BAR) (2008)
-
Remove luggage compartment right side trim.
-
Remove luggage compartment cargo floor support - 1 - upward - arrows -.
All Vehicles
-
Release retaining clips - arrows - and pivot Towing Recognition Control Module (J345) - item 1 - out of retaining frame.
-
Disconnect electrical connectors - 2 - and - 3 -.
Installing
Install in reverse order of removal, observing the following:
-
The new towing recognition control module (J345) must be coded in "Guided Fault Finding" or in " Guided Functions".
-
Select the function or path:
-
Follow further instructions on display of (VAS 5051B).
-
Install luggage compartment side trim.