Q7 Quattro V8-4.2L (BAR) (2008)
-
Press catch - 1 - in - direction of arrow - until harness connector - 2 - disengages.
-
Carefully pull off steering column switch together with Steering Column Electronic Systems Control Module J527.
Installing
Install in reverse order of removal, observing the following:
-
Ensure all connectors slide on as far as stop and engage audibly.
-
Insert top trim piece for steering column switch into catches of bottom trim piece, press together and bolt.
-
Install steering wheel.
-
Install airbag unit.
Tightening torque
Component
Nm
Steering Column Switch Module
3
Trim for steering column switch
0.6
Lower trim to steering column
3
Handle trim on mechanical steering
column adjustment handle
4.5