Q7 Quattro V8-4.2L (BAR) (2008)
Cowl Moulding / Trim: Service and Repair
Plenum Chamber Cover
1
Plenum chamber cover
‹› To remove, first unclip from plenum chamber bulkhead
‹› For easier removal/installation, coat edge strip with some soap.
‹› Remove plenum chamber cover upward diagonally from edge strip beginning at window edge.
CAUTION!
Danger of window breaking.
When installing, plenum chamber cover must not be driven on. Carefully press plenum chamber cover into edge strip.
2
Windshield
3
Clip
‹› Is clipped into plenum chamber bulkhead