Q7 Quattro V8-4.2L (BAR) (2008)
-
Beginning at front, remove window frame trim - 1 - from window frame - arrows -.
Installation
Installation is in reverse order of removal, noting the following:
-
First position back of window frame trim on outer edge of frame.
-
Pull window frame trim - 2 - over window frame seal - 1 -. Trim must engage in groove - arrow -.
-
Pull Trim Removal Wedge (3409) between window frame trim - 1 - and door seal - 2 - along the entire length and at the same time, press window
frame trim onto frame in seal groove.