Q7 Quattro V8-4.2L (BAR) (2008)
/Page-3675002.png)
‹› Bolts are micro-encapsulated and must be replaced after each loosening.
‹› Before installing the new bolts, the threads of the corresponding nuts must be cleaned.
-
Position console - 2 -.
-
Attach screws - 1 - in sequence - A -, - B -, - C - and - D -.
-
Tighten screws - 1 - in sequence - A -, - B -, - C - and - D - to specified torque refer to => [ Passenger Seat Console with Drawer ] See:
Seats/Service and Repair/Removal and Replacement/Console Mounting Pieces and Bracket.
