Q7 Quattro V8-4.2L (BAR) (2008)
-
Slide the trim - 2 - on the right side in direction of arrow - A - all the way and at the same time in direction of arrow - B -, until the right corner
unclips.
-
Continue in the same manner for the remaining 3 lock points using the trim removal wedge (3409).
Installation
-
Slide the trim - 1 - for the cupholder cover into the 3 guides - A - in the cupholder cover - 2 -.
-
At the same time slide the trim - 1 - in direction of - arrow B - all the way - C -.